Scratch & Dent - Eccotemp 45HI-LP Indoor Liquid Propane Tankless Water Heater

$699.00 $348.00 (You save $351.00)
Installed Together
Recommended Add Ons
Add A Protection Plan
Unavailable

Scratch & Dent - Eccotemp 45HI-LP Indoor Liquid Propane Tankless Water Heater

( 0 )

Scratch & Dent - Eccotemp 45HI-LP Indoor Liquid Propane Tankless Water Heater

$699.00 $348.00 (You save $351.00)
Installed Together
Recommended Add Ons
Add A Protection Plan
Unavailable

Product Information

Please note that Scratch and Dent models may be used and refurbished to working conditions and may include wear and tear or cosmetic defects

*All Open Box & Scratch and Dent models are tested to original working condition and come with their original manufacturer warranty.

The Eccotemp 45HI-LP is the largest indoor model of the Eccotemp tankless line. Rated at an impressive 6.8 GPM and 150,000 BTU per hour, the 45HI-LP can meet all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications. The compact, wall mounted 45HI-LP is powered by liquid propane. With its fully automated control system, the Eccotemp 45HI-LP is the ideal choice for any standard sized home.

45HI Manual (English)

45HI Warranty

Power:
Up to 150,000 BTU, 110V power supply
Vent and Inlet Measurements:
4 inch venting, 3/4 inch water inlet & outlet, 3/4 inch gas inlet
Needs 1.1 GPM (each faucet/fixture) to ignite

Flow Rate:

  • 35 degree rise: 6.8 GPM
  • 50 degree rise: 5.0 GPM
  • 70 degree rise: 3.4 GPM

Additional Features

  • Recommended to use 3/4 inch lines throughout plumbing system (shower, tubs, sinks, etc.)
  • Uses 4" vent kit
  • CSA certified for US and Canadian use
  • Liquid Propane Powered
  • Digital display with simple controls and diagnostics
  • 110 volt UL listed power cord
  • Field tested to 5500 ft. elevation (not recommended to be used any higher)
  • 150,000 BTU
  • Energy Factor: 0.80
  • 10 year warranty on heat exchanger
  • 5 year warranty on parts
  • Energy rating: 82%
  • Hot water capacity range: 1.2 - 6.8 GPM
  • Maximum / Minimum gas rate: 19,800 - 150,000 BTUs
  • Product dimensions & weight: 15"x5"x24" & 38lbs.

IMPORTANT NOTE: Not recommended for elevation above 3000 ft and cannot be used for HYDRONIC SYSTEM, RECIRCULATING or FLOOR HEATING.

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details.

Attention*** If you add a vent kit to this order, here is the information:

4" Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit for Eccotemp 45HI-LP and 45HI-NG models.  This vent kit is supplied with all the necessary components for a quick and seamless installation. It includes the following pieces:

  • (1) Termination Hood with Backflow Preventer
  • (1) 4" x 90 Degree Elbow
  • (1) 4" x 1' Pipe
  • (1) 4" x 1.5' Pipe
  • (1) 4" Wall Thimble
  • (1) 4" Appliance Adapter

Made of AL-294C stainless steel. This is Category II/III approved.

For more details:  4" Horizontal Z-Vent Water Heater Vent Kit with Backflow

For more details:  Eccotemp 4" Vertical Vent Kit

CSA 2714806
Class 2901 85
Class 2901 05
Class 2902 93
Class 2902 13

energy-guide-125x90.jpg

Dimensions 29.00" x 17.00" x 10.00"
GTIN: 00891876002362
SKU: SD45HILP
0 (0 Reviews) Write a review

Product Information

Please note that Scratch and Dent models may be used and refurbished to working conditions and may include wear and tear or cosmetic defects

*All Open Box & Scratch and Dent models are tested to original working condition and come with their original manufacturer warranty.

The Eccotemp 45HI-LP is the largest indoor model of the Eccotemp tankless line. Rated at an impressive 6.8 GPM and 150,000 BTU per hour, the 45HI-LP can meet all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications. The compact, wall mounted 45HI-LP is powered by liquid propane. With its fully automated control system, the Eccotemp 45HI-LP is the ideal choice for any standard sized home.

45HI Manual (English)

45HI Warranty

Power:
Up to 150,000 BTU, 110V power supply
Vent and Inlet Measurements:
4 inch venting, 3/4 inch water inlet & outlet, 3/4 inch gas inlet
Needs 1.1 GPM (each faucet/fixture) to ignite

Flow Rate:

  • 35 degree rise: 6.8 GPM
  • 50 degree rise: 5.0 GPM
  • 70 degree rise: 3.4 GPM

Additional Features

  • Recommended to use 3/4 inch lines throughout plumbing system (shower, tubs, sinks, etc.)
  • Uses 4" vent kit
  • CSA certified for US and Canadian use
  • Liquid Propane Powered
  • Digital display with simple controls and diagnostics
  • 110 volt UL listed power cord
  • Field tested to 5500 ft. elevation (not recommended to be used any higher)
  • 150,000 BTU
  • Energy Factor: 0.80
  • 10 year warranty on heat exchanger
  • 5 year warranty on parts
  • Energy rating: 82%
  • Hot water capacity range: 1.2 - 6.8 GPM
  • Maximum / Minimum gas rate: 19,800 - 150,000 BTUs
  • Product dimensions & weight: 15"x5"x24" & 38lbs.

IMPORTANT NOTE: Not recommended for elevation above 3000 ft and cannot be used for HYDRONIC SYSTEM, RECIRCULATING or FLOOR HEATING.

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details.

Attention*** If you add a vent kit to this order, here is the information:

4" Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit for Eccotemp 45HI-LP and 45HI-NG models.  This vent kit is supplied with all the necessary components for a quick and seamless installation. It includes the following pieces:

  • (1) Termination Hood with Backflow Preventer
  • (1) 4" x 90 Degree Elbow
  • (1) 4" x 1' Pipe
  • (1) 4" x 1.5' Pipe
  • (1) 4" Wall Thimble
  • (1) 4" Appliance Adapter

Made of AL-294C stainless steel. This is Category II/III approved.

For more details:  4" Horizontal Z-Vent Water Heater Vent Kit with Backflow

For more details:  Eccotemp 4" Vertical Vent Kit

CSA 2714806
Class 2901 85
Class 2901 05
Class 2902 93
Class 2902 13

energy-guide-125x90.jpg

Dimensions 29.00" x 17.00" x 10.00"
GTIN: 00891876002362
SKU: SD45HILP
0 (0 Reviews) Write a review

Please note that Scratch and Dent models may be used and refurbished to working conditions and may include wear and tear or cosmetic defects

*All Open Box & Scratch and Dent models are tested to original working condition and come with their original manufacturer warranty.

The Eccotemp 45HI-LP is the largest indoor model of the Eccotemp tankless line. Rated at an impressive 6.8 GPM and 150,000 BTU per hour, the 45HI-LP can meet all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications. The compact, wall mounted 45HI-LP is powered by liquid propane. With its fully automated control system, the Eccotemp 45HI-LP is the ideal choice for any standard sized home.

45HI Manual (English)

45HI Warranty

Power:
Up to 150,000 BTU, 110V power supply
Vent and Inlet Measurements:
4 inch venting, 3/4 inch water inlet & outlet, 3/4 inch gas inlet
Needs 1.1 GPM (each faucet/fixture) to ignite

Flow Rate:

  • 35 degree rise: 6.8 GPM
  • 50 degree rise: 5.0 GPM
  • 70 degree rise: 3.4 GPM

Additional Features

  • Recommended to use 3/4 inch lines throughout plumbing system (shower, tubs, sinks, etc.)
  • Uses 4" vent kit
  • CSA certified for US and Canadian use
  • Liquid Propane Powered
  • Digital display with simple controls and diagnostics
  • 110 volt UL listed power cord
  • Field tested to 5500 ft. elevation (not recommended to be used any higher)
  • 150,000 BTU
  • Energy Factor: 0.80
  • 10 year warranty on heat exchanger
  • 5 year warranty on parts
  • Energy rating: 82%
  • Hot water capacity range: 1.2 - 6.8 GPM
  • Maximum / Minimum gas rate: 19,800 - 150,000 BTUs
  • Product dimensions & weight: 15"x5"x24" & 38lbs.

IMPORTANT NOTE: Not recommended for elevation above 3000 ft and cannot be used for HYDRONIC SYSTEM, RECIRCULATING or FLOOR HEATING.

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details.

Attention*** If you add a vent kit to this order, here is the information:

4" Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit for Eccotemp 45HI-LP and 45HI-NG models.  This vent kit is supplied with all the necessary components for a quick and seamless installation. It includes the following pieces:

  • (1) Termination Hood with Backflow Preventer
  • (1) 4" x 90 Degree Elbow
  • (1) 4" x 1' Pipe
  • (1) 4" x 1.5' Pipe
  • (1) 4" Wall Thimble
  • (1) 4" Appliance Adapter

Made of AL-294C stainless steel. This is Category II/III approved.

For more details:  4" Horizontal Z-Vent Water Heater Vent Kit with Backflow

For more details:  Eccotemp 4" Vertical Vent Kit

CSA 2714806
Class 2901 85
Class 2901 05
Class 2902 93
Class 2902 13

energy-guide-125x90.jpg

Dimensions 29.00" x 17.00" x 10.00"
GTIN: 00891876002362
SKU: SD45HILP
0 (0 Reviews) Write a review

Related Products