L10 Gas-Water Valve Assembly

$27.95
On backorder until Dec 31st 2021
On backorder until Dec 31st 2021

L10 Gas-Water Valve Assembly

( 18 )

L10 Gas-Water Valve Assembly

$27.95
On backorder until Dec 31st 2021
On backorder until Dec 31st 2021

Product Information

This is the entire Eccotemp gas-water valve for the L10, completely assembled. Please make sure to order the flare fitting that screws onto the gas line if yours cannot be removed from your existing water heater. Always be sure to use pipe tape on the non-flared connections and check for gas leaks before use. If you feel you may need to replace your current gas-water valve assembly, please call Technical Support at 866-356-1992 for advice.

 

Customer assumes all liability when purchasing replacement parts.

Dimensions 10.00" x 10.00" x 10.00"
GTIN: 00851293008187
SKU: 1012029
5 (18 Reviews) Write a review
5 Stars
Fits Marey

This was a perfect match to my Marey branded WH that was leaking H20 at the micro switch. The item arrived over the weekend, and it took less than an hour to install it. I disconnected and dismounted the WH from the wall to perform the operation on a well lit bench. I have removed similar WHs from service in the past due to leaking diaphragms and seals because I could not find replacement parts; each one could have been saved if I had had parts available. Kudos to Eccotemp for making these parts available.

5 Stars
perfect

A little tricky to get the old one out, but once in, the new one made my 10 year old L10 work like brand new. I also cleaned out the heat exchanger with carburetor cleaner....that helped things out too.

5 Stars
Gas Wtr Assembly/Ignition/Batt pack

Thanks Vanessa, great job finding the problem. Great knowing you and Eccotemp are so good at your job. You have a life-long customer.

5 Stars
Gas valve review 2018

great product installed no problem. works great.

5 Stars
Water Valve Assembly

Problem solved

5 Stars
L10 Gas-Water Assembly

Easy to install. Fixed my problem.

5 Stars
Glad parts are available.

Fast shipping of part. It was great to see that individual parts are available for these units. The gas inlet was damaged on my L10 and although I did not need the whole assembly I was happy to be able to change it out.

5 Stars
works

Easy to install

5 Stars
It Works

This product works as it should. This whole episode has been an enormous education for me, and I like that. This unit is actually very simple, once you study it, and I would think maintenance would be a minimum over the course of the units lifetime, what ever that may be. Using video for diagnosis is an excellent tool.

5 Stars
great service @ parts

works great and shipping was on time. Thank you for a product. dan

Product Information

This is the entire Eccotemp gas-water valve for the L10, completely assembled. Please make sure to order the flare fitting that screws onto the gas line if yours cannot be removed from your existing water heater. Always be sure to use pipe tape on the non-flared connections and check for gas leaks before use. If you feel you may need to replace your current gas-water valve assembly, please call Technical Support at 866-356-1992 for advice.

 

Customer assumes all liability when purchasing replacement parts.

Dimensions 10.00" x 10.00" x 10.00"
GTIN: 00851293008187
SKU: 1012029
5 (18 Reviews) Write a review
5 Stars
Fits Marey

This was a perfect match to my Marey branded WH that was leaking H20 at the micro switch. The item arrived over the weekend, and it took less than an hour to install it. I disconnected and dismounted the WH from the wall to perform the operation on a well lit bench. I have removed similar WHs from service in the past due to leaking diaphragms and seals because I could not find replacement parts; each one could have been saved if I had had parts available. Kudos to Eccotemp for making these parts available.

5 Stars
perfect

A little tricky to get the old one out, but once in, the new one made my 10 year old L10 work like brand new. I also cleaned out the heat exchanger with carburetor cleaner....that helped things out too.

5 Stars
Gas Wtr Assembly/Ignition/Batt pack

Thanks Vanessa, great job finding the problem. Great knowing you and Eccotemp are so good at your job. You have a life-long customer.

5 Stars
Gas valve review 2018

great product installed no problem. works great.

5 Stars
Water Valve Assembly

Problem solved

5 Stars
L10 Gas-Water Assembly

Easy to install. Fixed my problem.

5 Stars
Glad parts are available.

Fast shipping of part. It was great to see that individual parts are available for these units. The gas inlet was damaged on my L10 and although I did not need the whole assembly I was happy to be able to change it out.

5 Stars
works

Easy to install

5 Stars
It Works

This product works as it should. This whole episode has been an enormous education for me, and I like that. This unit is actually very simple, once you study it, and I would think maintenance would be a minimum over the course of the units lifetime, what ever that may be. Using video for diagnosis is an excellent tool.

5 Stars
great service @ parts

works great and shipping was on time. Thank you for a product. dan

This is the entire Eccotemp gas-water valve for the L10, completely assembled. Please make sure to order the flare fitting that screws onto the gas line if yours cannot be removed from your existing water heater. Always be sure to use pipe tape on the non-flared connections and check for gas leaks before use. If you feel you may need to replace your current gas-water valve assembly, please call Technical Support at 866-356-1992 for advice.

 

Customer assumes all liability when purchasing replacement parts.

Dimensions 10.00" x 10.00" x 10.00"
GTIN: 00851293008187
SKU: 1012029
5 (18 Reviews) Write a review
5 Stars
Fits Marey

This was a perfect match to my Marey branded WH that was leaking H20 at the micro switch. The item arrived over the weekend, and it took less than an hour to install it. I disconnected and dismounted the WH from the wall to perform the operation on a well lit bench. I have removed similar WHs from service in the past due to leaking diaphragms and seals because I could not find replacement parts; each one could have been saved if I had had parts available. Kudos to Eccotemp for making these parts available.

5 Stars
perfect

A little tricky to get the old one out, but once in, the new one made my 10 year old L10 work like brand new. I also cleaned out the heat exchanger with carburetor cleaner....that helped things out too.

5 Stars
Gas Wtr Assembly/Ignition/Batt pack

Thanks Vanessa, great job finding the problem. Great knowing you and Eccotemp are so good at your job. You have a life-long customer.

5 Stars
Gas valve review 2018

great product installed no problem. works great.

5 Stars
Water Valve Assembly

Problem solved

5 Stars
L10 Gas-Water Assembly

Easy to install. Fixed my problem.

5 Stars
Glad parts are available.

Fast shipping of part. It was great to see that individual parts are available for these units. The gas inlet was damaged on my L10 and although I did not need the whole assembly I was happy to be able to change it out.

5 Stars
works

Easy to install

5 Stars
It Works

This product works as it should. This whole episode has been an enormous education for me, and I like that. This unit is actually very simple, once you study it, and I would think maintenance would be a minimum over the course of the units lifetime, what ever that may be. Using video for diagnosis is an excellent tool.

5 Stars
great service @ parts

works great and shipping was on time. Thank you for a product. dan

Related Products