Eccotemp EL22i Indoor 6.8 GPM Natural Gas Tankless Water Heater Vertical Bundle

$1,099.00 $899.00 (You save $200.00)
Recommended Add Ons
Add A Protection Plan

Eccotemp EL22i Indoor 6.8 GPM Natural Gas Tankless Water Heater Vertical Bundle

( 1 )

Eccotemp EL22i Indoor 6.8 GPM Natural Gas Tankless Water Heater Vertical Bundle

$1,099.00 $899.00 (You save $200.00)
Recommended Add Ons
Add A Protection Plan

Product Information

This bundle includes the Eccotemp EL22i Indoor Natural Gas Tankless Water Heater and the Eccotemp 4" Vertical Vent Kit.

The Eccotemp EL22i Natural Gas Tankless Water Heater is the largest indoor model of the Eccotemp tankless line. This model has a sleek, black tempered front glass casing with automatic temperature controls and a touch screen with an LED digital display that shows the output temperature reading and gallons per minute flow rate. The Eccotemp EL22i is rated at an impressive 6.8 gallons per minute and has a maximum BTU rate of 140,000. Whether you use natural gas or liquid propane the Eccotemp EL22i is the perfect solution for all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications.

 

Product Features: 

  • CSA Certified for US and Canadian use
  • Hot water capacity range: 0.8 - 6.8 GPM
    • 45-degree rise: 6.8 GPM
    • 50-degree rise: 5.0 GPM
    • 70-degree rise: 3.4 GPM
  • Digital Remote available for purchase separately
  • Natural Gas-Powered 
  • 110-volt UL Listed Power Cord
  • Activation Flow: 0.8 GPM 
  • Maximum Flow Rate: 6.8 GPM 
  • Energy Factor: 0.80 
  • Energy Rating: 82% 
  • Minimum/Maximum Gas Rate: 26,000 - 140,000 BTUs
  • 4" Venting Required

 

The Eccotemp 4" Vertical Vent Kit includes:

  • 1 x 4" Rain Cap
  • 1 x 4" Top support/Storm Collar
  • 1 x 4" Adjustable Roof Flashing (Normal 30-Degree Flashing)
  • 1 x 4" Condensation Drain Pipe
  • 1 x 4" Universal appliance adapter with backflow preventer

For vertical installation of Eccotemp 45HI and EL22i Series indoor water heaters. You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet you will need and determine if you will need a condensation drain. Also remember there is a maximum vent run of 20 feet, subtracting 4 feet for every 90 degree elbow in the run. Please also note that any vertical venting installation with more than a 5' run length requires a vertical condensation drain pipe as well.

Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.

The Eccotemp EL22i has been tested for use at elevations up to 2000 feet. Installation and use of the Eccotemp EL22i above 2000 feet may affect overall product efficiency and performance. Installation and use of the Eccotemp EL22i above 5000 feet is not recommended.

IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEM, RECIRCULATING, or FLOOR HEATING.

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details.

All Whole Home Water Heater purchases will be shipped with SIGNATURE REQUIRED. If you wish to remove SIGNATURE REQUIRED from your shipment please contact Customer Service immediately to have it removed. Please Note: By opting out of SIGNATURE REQUIRED you release Eccotemp Systems, LLC from all liability of lost or stolen packages. Call 1-866-356-1992 or chat with us here to speak with a customer service agent.
 
 
Dimensions 17.75" x 29.50" x 9.50"
GTIN: 00851293008941
SKU: EL22i-NGV
5 (1 Review) Write a review
5 Stars
El22i ng

Bought the el22i 2 weeks ago I love it so far hot water comes pretty quick I live in Wisconsin ground water is about 47 degrees right now I also love how its quite when running I recommend this unit !

Product Information

This bundle includes the Eccotemp EL22i Indoor Natural Gas Tankless Water Heater and the Eccotemp 4" Vertical Vent Kit.

The Eccotemp EL22i Natural Gas Tankless Water Heater is the largest indoor model of the Eccotemp tankless line. This model has a sleek, black tempered front glass casing with automatic temperature controls and a touch screen with an LED digital display that shows the output temperature reading and gallons per minute flow rate. The Eccotemp EL22i is rated at an impressive 6.8 gallons per minute and has a maximum BTU rate of 140,000. Whether you use natural gas or liquid propane the Eccotemp EL22i is the perfect solution for all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications.

 

Product Features: 

  • CSA Certified for US and Canadian use
  • Hot water capacity range: 0.8 - 6.8 GPM
    • 45-degree rise: 6.8 GPM
    • 50-degree rise: 5.0 GPM
    • 70-degree rise: 3.4 GPM
  • Digital Remote available for purchase separately
  • Natural Gas-Powered 
  • 110-volt UL Listed Power Cord
  • Activation Flow: 0.8 GPM 
  • Maximum Flow Rate: 6.8 GPM 
  • Energy Factor: 0.80 
  • Energy Rating: 82% 
  • Minimum/Maximum Gas Rate: 26,000 - 140,000 BTUs
  • 4" Venting Required

 

The Eccotemp 4" Vertical Vent Kit includes:

  • 1 x 4" Rain Cap
  • 1 x 4" Top support/Storm Collar
  • 1 x 4" Adjustable Roof Flashing (Normal 30-Degree Flashing)
  • 1 x 4" Condensation Drain Pipe
  • 1 x 4" Universal appliance adapter with backflow preventer

For vertical installation of Eccotemp 45HI and EL22i Series indoor water heaters. You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet you will need and determine if you will need a condensation drain. Also remember there is a maximum vent run of 20 feet, subtracting 4 feet for every 90 degree elbow in the run. Please also note that any vertical venting installation with more than a 5' run length requires a vertical condensation drain pipe as well.

Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.

The Eccotemp EL22i has been tested for use at elevations up to 2000 feet. Installation and use of the Eccotemp EL22i above 2000 feet may affect overall product efficiency and performance. Installation and use of the Eccotemp EL22i above 5000 feet is not recommended.

IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEM, RECIRCULATING, or FLOOR HEATING.

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details.

All Whole Home Water Heater purchases will be shipped with SIGNATURE REQUIRED. If you wish to remove SIGNATURE REQUIRED from your shipment please contact Customer Service immediately to have it removed. Please Note: By opting out of SIGNATURE REQUIRED you release Eccotemp Systems, LLC from all liability of lost or stolen packages. Call 1-866-356-1992 or chat with us here to speak with a customer service agent.
 
 
Dimensions 17.75" x 29.50" x 9.50"
GTIN: 00851293008941
SKU: EL22i-NGV
5 (1 Review) Write a review
5 Stars
El22i ng

Bought the el22i 2 weeks ago I love it so far hot water comes pretty quick I live in Wisconsin ground water is about 47 degrees right now I also love how its quite when running I recommend this unit !

This bundle includes the Eccotemp EL22i Indoor Natural Gas Tankless Water Heater and the Eccotemp 4" Vertical Vent Kit.

The Eccotemp EL22i Natural Gas Tankless Water Heater is the largest indoor model of the Eccotemp tankless line. This model has a sleek, black tempered front glass casing with automatic temperature controls and a touch screen with an LED digital display that shows the output temperature reading and gallons per minute flow rate. The Eccotemp EL22i is rated at an impressive 6.8 gallons per minute and has a maximum BTU rate of 140,000. Whether you use natural gas or liquid propane the Eccotemp EL22i is the perfect solution for all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications.

 

Product Features: 

  • CSA Certified for US and Canadian use
  • Hot water capacity range: 0.8 - 6.8 GPM
    • 45-degree rise: 6.8 GPM
    • 50-degree rise: 5.0 GPM
    • 70-degree rise: 3.4 GPM
  • Digital Remote available for purchase separately
  • Natural Gas-Powered 
  • 110-volt UL Listed Power Cord
  • Activation Flow: 0.8 GPM 
  • Maximum Flow Rate: 6.8 GPM 
  • Energy Factor: 0.80 
  • Energy Rating: 82% 
  • Minimum/Maximum Gas Rate: 26,000 - 140,000 BTUs
  • 4" Venting Required

 

The Eccotemp 4" Vertical Vent Kit includes:

  • 1 x 4" Rain Cap
  • 1 x 4" Top support/Storm Collar
  • 1 x 4" Adjustable Roof Flashing (Normal 30-Degree Flashing)
  • 1 x 4" Condensation Drain Pipe
  • 1 x 4" Universal appliance adapter with backflow preventer

For vertical installation of Eccotemp 45HI and EL22i Series indoor water heaters. You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet you will need and determine if you will need a condensation drain. Also remember there is a maximum vent run of 20 feet, subtracting 4 feet for every 90 degree elbow in the run. Please also note that any vertical venting installation with more than a 5' run length requires a vertical condensation drain pipe as well.

Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.

The Eccotemp EL22i has been tested for use at elevations up to 2000 feet. Installation and use of the Eccotemp EL22i above 2000 feet may affect overall product efficiency and performance. Installation and use of the Eccotemp EL22i above 5000 feet is not recommended.

IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEM, RECIRCULATING, or FLOOR HEATING.

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details.

All Whole Home Water Heater purchases will be shipped with SIGNATURE REQUIRED. If you wish to remove SIGNATURE REQUIRED from your shipment please contact Customer Service immediately to have it removed. Please Note: By opting out of SIGNATURE REQUIRED you release Eccotemp Systems, LLC from all liability of lost or stolen packages. Call 1-866-356-1992 or chat with us here to speak with a customer service agent.
 
 
Dimensions 17.75" x 29.50" x 9.50"
GTIN: 00851293008941
SKU: EL22i-NGV
5 (1 Review) Write a review
5 Stars
El22i ng

Bought the el22i 2 weeks ago I love it so far hot water comes pretty quick I live in Wisconsin ground water is about 47 degrees right now I also love how its quite when running I recommend this unit !

Related Products