New 2017 Model update: This model has been redesigned to activate at a lower flow rate of .8 GPM as well as updated self diagnostics.
Eccotemp 45HI-LP & Eccotemp 4" Vertical Vent Kit Bundle
The Eccotemp 45HI-LP is the largest indoor model of the Eccotemp tankless line. Rated at impressive 6.8 GPM and 150,000 BTU per hour, the 45HI-LP can meet all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications. The compact, wall mounted 45HI-LP is powered by liquid propane. With its fully automated control system, the Eccotemp 45HI-LP is the ideal choice for any standard sized home.
- CSA certified for US and Canadian use
- Hot water capacity range: .8 - 6.8 GPM
- 5-degree rise: 6.8 GPM
- 50-degree rise: 5.0 GPM
- 70-degree rise: 3.4 GPM
- Activation Flow .8 GPM
- Liquid Propane Powered
- Digital display with simple controls and diagnostics
- Energy Factor: 0.80
- Energy rating: 82%
- Maximum / Minimum gas rate: 19,800 - 150,000 BTUs
- 3/4” Water Inlet & Outlet
- 3/4” Gas Inlet
- 4” Venting
Eccotemp 45HI-LP Dimensions:
- Height 28"
- Width 15"
- Depth 7.5"
- Weight approx. 38 lbs.
- Shipping weight 39.7 lbs.
- 110 volt UL listed power cord
- 10-year warranty on heat exchanger
- 5-year warranty on parts
- T&P Relief Valve
- Gas Shut Off Valve
IMPORTANT NOTE: Not recommended for elevation above 3000 ft and cannot be used for HYDRONIC SYTEM, RECIRCULATING or FLOOR HEATING.
Eccotemp 4" Vertical Vent Kit
This is for vertical installation of the Eccotemp 45HI (indoor models). You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet you will need as well determine if you will need a condensation drain. Also remember there is a maximum vent run of 20 feet, subtracting 4 feet for every 90 degree elbow in the run.
- 1 x 4" Rain cap
- 1 x 4" Top support/Storm collar
- 1 x 4" Adjustable roof flashing (normal 30 degree flashing)
- 1 x 4" Universal appliance adaptor
- 1 x 4" Back flow preventor
- 1 x 4" Vertical drain pipe
Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.
Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater! Click here for details.