Eccotemp 45HI Indoor Liquid Propane with Vertical Kit Bundle

$999.00 $629.00 (You save $370.00)
Frequently Purchase Together
Add A Protection Plan

Eccotemp 45HI Indoor Liquid Propane with Vertical Kit Bundle

( 0 )

Eccotemp 45HI Indoor Liquid Propane with Vertical Kit Bundle

$999.00 $629.00 (You save $370.00)
Frequently Purchase Together
Add A Protection Plan

Product Information

 

This model has been redesigned to activate at a lower flow rate of .8 GPM as well as updated self diagnostics.

This bundle includes the Eccotemp 45HI-LP and the Eccotemp 4" Vertical Vent Kit Bundle.

The Eccotemp 45HI-LP is the largest indoor model of the Eccotemp tankless line. Rated at impressive 6.8 GPM and 150,000 BTU per hour, the 45HI-LP can meet all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications. The compact, wall mounted 45HI-LP is powered by liquid propane. With its fully automated control system, the Eccotemp 45HI-LP is the ideal choice for any standard sized home.

45HI Manual

45HI Warranty

Product Features:

  • CSA certified for US and Canadian use
  • Hot water capacity range: .8 - 6.8 GPM
    • 45-degree rise: 6.8 GPM
    • 50-degree rise: 5.0 GPM
    • 70-degree rise: 3.4 GPM
  • Activation Flow .8 GPM
  • Liquid Propane Powered
  • Digital display with simple controls and diagnostics
  • Energy Factor: 0.80
  • Energy rating: 82%
  • Maximum / Minimum gas rate: 19,800 - 150,000 BTUs
  • 3/4” Water Inlet & Outlet
  • 3/4” Gas Inlet
  • 4” Venting

Eccotemp 45HI-LP Dimensions:

  • Height 28"
  • Width 15"
  • Depth 7.5"
  • Weight approx. 38 lbs.
  • Shipping weight 39.7 lbs.

What’s included:

  • 110 volt UL listed power cord
  • 10-year warranty on heat exchanger
  • 5-year warranty on parts

IMPORTANT NOTE: Not recommended for elevation above 3000 ft and cannot be used for HYDRONIC SYSTEM, RECIRCULATING or FLOOR HEATING.

The Eccotemp 4" Vertical Vent Kit includes:

  • 1 x 4" Rain cap
  • 1 x 4" Top support/Storm collar
  • 1 x 4" Adjustable roof flashing (normal 30 degree flashing)
  • 1 x 4" Universal appliance adaptor
  • 1 x 4" Back flow preventor 
  • 1 x 4" Vertical drain pipe

You will need to determine how many additional feet of venting you need and purchase an additional Z-Vent straight pipe. There is a maximum vent run of 20 feet, subtracting 4 feet for every 90 degree elbow in the run. This vent kit does not include a condensation drain pipe. If you need one, they can be purchased separately.

Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details. 

energy-guide-125x90.jpg

Dimensions 15.00" x 24.00" x 5.00"
GTIN: 00891876002669
SKU: 45HI-LPV
0 (0 Reviews) Write a review
10 Year Limited Manufacturers Warranty - Heat Exchanger, 5 Year Limited Manufacturers Warranty - Parts

Product Information

 

This model has been redesigned to activate at a lower flow rate of .8 GPM as well as updated self diagnostics.

This bundle includes the Eccotemp 45HI-LP and the Eccotemp 4" Vertical Vent Kit Bundle.

The Eccotemp 45HI-LP is the largest indoor model of the Eccotemp tankless line. Rated at impressive 6.8 GPM and 150,000 BTU per hour, the 45HI-LP can meet all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications. The compact, wall mounted 45HI-LP is powered by liquid propane. With its fully automated control system, the Eccotemp 45HI-LP is the ideal choice for any standard sized home.

45HI Manual

45HI Warranty

Product Features:

  • CSA certified for US and Canadian use
  • Hot water capacity range: .8 - 6.8 GPM
    • 45-degree rise: 6.8 GPM
    • 50-degree rise: 5.0 GPM
    • 70-degree rise: 3.4 GPM
  • Activation Flow .8 GPM
  • Liquid Propane Powered
  • Digital display with simple controls and diagnostics
  • Energy Factor: 0.80
  • Energy rating: 82%
  • Maximum / Minimum gas rate: 19,800 - 150,000 BTUs
  • 3/4” Water Inlet & Outlet
  • 3/4” Gas Inlet
  • 4” Venting

Eccotemp 45HI-LP Dimensions:

  • Height 28"
  • Width 15"
  • Depth 7.5"
  • Weight approx. 38 lbs.
  • Shipping weight 39.7 lbs.

What’s included:

  • 110 volt UL listed power cord
  • 10-year warranty on heat exchanger
  • 5-year warranty on parts

IMPORTANT NOTE: Not recommended for elevation above 3000 ft and cannot be used for HYDRONIC SYSTEM, RECIRCULATING or FLOOR HEATING.

The Eccotemp 4" Vertical Vent Kit includes:

  • 1 x 4" Rain cap
  • 1 x 4" Top support/Storm collar
  • 1 x 4" Adjustable roof flashing (normal 30 degree flashing)
  • 1 x 4" Universal appliance adaptor
  • 1 x 4" Back flow preventor 
  • 1 x 4" Vertical drain pipe

You will need to determine how many additional feet of venting you need and purchase an additional Z-Vent straight pipe. There is a maximum vent run of 20 feet, subtracting 4 feet for every 90 degree elbow in the run. This vent kit does not include a condensation drain pipe. If you need one, they can be purchased separately.

Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details. 

energy-guide-125x90.jpg

Dimensions 15.00" x 24.00" x 5.00"
GTIN: 00891876002669
SKU: 45HI-LPV
0 (0 Reviews) Write a review
10 Year Limited Manufacturers Warranty - Heat Exchanger, 5 Year Limited Manufacturers Warranty - Parts

 

This model has been redesigned to activate at a lower flow rate of .8 GPM as well as updated self diagnostics.

This bundle includes the Eccotemp 45HI-LP and the Eccotemp 4" Vertical Vent Kit Bundle.

The Eccotemp 45HI-LP is the largest indoor model of the Eccotemp tankless line. Rated at impressive 6.8 GPM and 150,000 BTU per hour, the 45HI-LP can meet all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications. The compact, wall mounted 45HI-LP is powered by liquid propane. With its fully automated control system, the Eccotemp 45HI-LP is the ideal choice for any standard sized home.

45HI Manual

45HI Warranty

Product Features:

  • CSA certified for US and Canadian use
  • Hot water capacity range: .8 - 6.8 GPM
    • 45-degree rise: 6.8 GPM
    • 50-degree rise: 5.0 GPM
    • 70-degree rise: 3.4 GPM
  • Activation Flow .8 GPM
  • Liquid Propane Powered
  • Digital display with simple controls and diagnostics
  • Energy Factor: 0.80
  • Energy rating: 82%
  • Maximum / Minimum gas rate: 19,800 - 150,000 BTUs
  • 3/4” Water Inlet & Outlet
  • 3/4” Gas Inlet
  • 4” Venting

Eccotemp 45HI-LP Dimensions:

  • Height 28"
  • Width 15"
  • Depth 7.5"
  • Weight approx. 38 lbs.
  • Shipping weight 39.7 lbs.

What’s included:

  • 110 volt UL listed power cord
  • 10-year warranty on heat exchanger
  • 5-year warranty on parts

IMPORTANT NOTE: Not recommended for elevation above 3000 ft and cannot be used for HYDRONIC SYSTEM, RECIRCULATING or FLOOR HEATING.

The Eccotemp 4" Vertical Vent Kit includes:

  • 1 x 4" Rain cap
  • 1 x 4" Top support/Storm collar
  • 1 x 4" Adjustable roof flashing (normal 30 degree flashing)
  • 1 x 4" Universal appliance adaptor
  • 1 x 4" Back flow preventor 
  • 1 x 4" Vertical drain pipe

You will need to determine how many additional feet of venting you need and purchase an additional Z-Vent straight pipe. There is a maximum vent run of 20 feet, subtracting 4 feet for every 90 degree elbow in the run. This vent kit does not include a condensation drain pipe. If you need one, they can be purchased separately.

Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details. 

energy-guide-125x90.jpg

Dimensions 15.00" x 24.00" x 5.00"
GTIN: 00891876002669
SKU: 45HI-LPV
0 (0 Reviews) Write a review

Related Products