Loading... Please wait...

Re-Conditioned Eccotemp 45HI-NG Indoor Natural Gas Tankless Water Heater (NEW 2017 Model)

  • Eccotemp 45HI tankless water heater
  • Eccotemp 45HI tankless water heater
  • Eccotemp 45HI tankless water heater
  • Eccotemp 45HI tankless water heater
$459.00
$699.00 (You save $240.00)

SKU:
RC45HING
Rating:
Availability:
24 to 48 hours




Shop Eccotemp Canada


Product Description

The Eccotemp 45HI-NG is the largest indoor model of the Eccotemp tankless line. Rated at impressive 6.8 GPM and 140,000 BTU per hour, the 45HI-NG can meet all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications. The compact, wall mounted 45HI-NG is powered by natural gas. With its fully automated control system, the Eccotemp 45HI-NG is the ideal choice for any standard sized home.

45HI Manual (English)

Power:

Up to 140,000 BTU, 110V power supply

Vent and Inlet Measurements:

4 inch venting, 3/4 inch water inlet & outlet, 3/4 inch gas inlet

Needs 1.1GPM(each faucet/fixture)to ignite

Flow Rate:

  • 35 degree rise: 6.8 GPM
  • 50 degree rise: 5.0 GMP
  • 70 degree rise: 3.4 GMP

Additional Features

  • Recommended to use 3/4 inch lines throughout plumbing system(shower, tubs, sinks, etc.)
  • Uses 4" vent kit
  • CSA certified for US and Canadian use
  • Natural Gas Powered
  • Digital remote with simple controls and diagnostics
  • 110 volt UL listed power cord
  • 140,000 BTU
  • Field tested to 5500 ft. elevation (not recommended to be used any higher)
  • Energy Factor: 0.80
  • 10 year warranty on heat exchanger
  • 5 year warranty on parts
  • Energy rating: 82%
  • Hot water capacity range: 1.2 - 6.8 GPM
  • Maximum / Minimum gas rate: 19,800 - 140,000 BTUs
  • Product dimensions & weight: 15"x5"x24" & 38lbs.

IMPORTANT NOTE: Not recommended for elevation above 3000 ft and cannot be used for HYDRONIC SYTEM, RECIRCULATING or FLOOR HEATING.

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using the Flow-Aide System Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details. 

Attention*** If you add a vent kit to this order, here is the information:

4" Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit for Eccotemp 40HI-LP and 40HI-NG models.  This vent kit is supplied with all the necessary components for a quick and seamless installation.  It includes the following pieces:

  • (1) Termination Hoodwith backflow preventer
  • (1) 4" x 90 Degree Elbow
  • (1) 4" x 1' Pipe
  • (1) 4" x 1.5' Pipe
  • (1) 4" Wall Thimble
  • (1) 4" Appliance Adapter

Made of AL-294C stainless steel.  This is Category II/III approved

For more details:  4" Horizontal Z-Vent Water Heater Vent Kit with Backflow

For more details: Eccotemp 4" Vertical Vent Kit

 

CSA 2714806

Class 2901 85

Class 2901 05

Class 2902 93

Class 2902 13


Find Similar Products by Category

Write your own product review

Product Reviews

  1. HOT HOT HOT HOT WATER 5 Star Review

    Posted by on 1st Feb 2016

    MY OLD TANKLESS HEATER WAS 10 YR OLD IT WAS GOING TO TAKE OVER $300.00 TO REPAIR. WELL DA
    I COMPPARED OVER 20 HEATER LOOKING AT ALL
    COMENTS. ECCOTEMP CAME OUT ON TOP WHEN YOU COMPARE PRICE AND PERFORMACE.
    AND THE OFFER OF A RECON UNIT FOR OVER$100.00 SAVING. I FEEL VERY CONFORTABLE IN BUYING A RECON UNIT WITH FULL WARRENTY.PERFORMACE IS UN BELIVLEABLE. NEVER FAIL TO LIGHT, WATER TEMP AT 110 IS STEADY. QUIET, EASY TO INSTALL
    GOOD LOOKING UNIT. I AM SURE IT WILL GIVE ME MANY YEARS OF SERVICE, WILL RECOMEN THIS BRAND TO ANY ONE. BEST ON THE MARKET.