Huge pressure and huge output - that’s the name of the game when you combine the Eccotemp L10 with the small but powerful Flojet 2.9 GPM 50 PSI. With almost twice the GPM of its smaller sibling the Eccotemp L5, the L10 has long been the high volume portable water heater of choice for cabins, lake houses and base camps. But if your little piece of outdoor paradise doesn’t include a water faucet, then you’re out of luck. This is where the Flojet Water Pump, a perfect fit with the L10, comes in. With its 2.9 GPM 50 PSI specs, this powerful little pump stands up to the high volume output of the L10 and will turn any container or body of cold water into instant, hugely pressurized, hot water. When facilities are lacking, keep your L10 running at maximum capacity with the Flojet 2.9 GPM 50 PSI.
Please note that this model is designed for recreational portable use only. This model is not intended for the following:
-Permanent installation of any kind.
-Plumbed into any fixtures (sinks, showers, etc).
• 2.9 GPM(Gallons per minute), 50 PSI, 12 Volt, 4.4 Amp
• Soft Noise Absorbing Mounts
• Can run dry
• Snap-in Port Fittings
• Soft, Noise Absorbing Mounts
• Corrosion Resistant Materials
IMPORTANT: This is a portable, recreational water heater and should not be permanently installed. When not in use, this water heater should be drained and stored away.
Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater! Click here for details.