This bundle includes the FVI12-NG Tankless water heater, 2.5" to 3" Stainless steel adapter, and the 3" Vertical vent kit.
FVI12-NG Tankless Water Heater
The Eccotemp FVI12-NG tankless water heater is a natural gas fired, indoor tankless water heater designed for small to medium hot water production where you need more than one hot water application at the same time. The Eccotemp FVI12-LP tankless water heater is perfect for vacation cabins, cottages, and smaller homes.
Eccotemp FVI12-NG tankless water heater comes with a horizontal stainless steel vent kit, ready to install. The Eccotemp FVI12-NGs 120 volt UL listed power cord powers the internal exhaust fan and digital display. It only pulls about 2 watts idle and 1.07 Amps during operation, making it ideal when energy conservation is paramount.
The FVI12 offers a 45 degrees F temperature rise when operating at maximum flow capacity and a 77 degree F temperature rise at 2.3 GPM.
Some additional Features
2.5 to 3" Stainless steel adapter
This stainless steel adapter can be used with the Eccotemp FVI12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with backflow preventer to ensure that freezing air does not come back through the vent pipe.
Eccotemp Vertical Ventilation kit 3"
This 3" single walled Z-Flex Vertical vent kit is for vertical installations only. You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet as well as need a condensation drain. Also remember A max vent run of 20 FT. subtracting 4 Ft. for every 90 Degree elbow in the run.
Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.